Driveline Additives

Additives for Driveline Formulation

CheMost supplies the individual additive components a formulator blends into a finished Driveline. The 4 grades below are tagged for this application from product data — only real, documented products appear here. Use the selector to narrow by specification and base oil, then request a sample or technical data sheet.

Applications in Driveline

Tagged Products in Driveline

Real, documented CheMost grades tagged for this application. Open a product for full technical detail, or request a sample.

Viscosity Index Improvers

Low-Molecular-Weight Polyisobutylene (PIB)

Low-molecular-weight polyisobutylene (PIB) — a non-toxic, non-drying liquid polymer used as a tackifier and viscosity / thickening additive, supplied in five molecular-weight grades (Mn 680–3500) from light VI and 2-stroke grades to high-tack anti-fling and adhesive grades.

Tackiness & Adhesive Additives

Polyisobutylene (PIB) Tackifier

Low-molecular-weight polyisobutylene (PIB) tackifier — the non-toxic "stick-on-metal" adhesion additive that keeps open-gear, chain and wire-rope lubricants clinging under load and resists fling-off, in five molecular-weight grades (Mn 680–3500) from light tack to maximum anti-fling.

Pour Point Depressants

Polymethacrylate (PMA) Pour Point Depressant

Oil-soluble polymethacrylate (PMA) pour point depressant (grades PPD02 & PPD02S) that improves low-temperature flow by controlling wax crystallisation; the high-viscosity PPD02S also lifts viscosity index for multigrade oils. For engine, industrial, hydraulic and gear oils.

Extreme Pressure Additives

Sulfurized Isobutylene

High-activity sulfurized isobutylene (CAS 68511-50-2) — 45% sulfur, chlorine-free, made by a high-pressure synthesis process for higher extreme-pressure and wear performance. A primary EP additive for automotive and industrial gear oils; P_D weld load 650 (ASTM D2596, 3%).